Skip to main content
All CollectionsDJIT10/T30 OperationsThe Basics
Unfolding and Pre-Flight Assessment
Unfolding and Pre-Flight Assessment

Setting Up, Battery Set Up, Pre-Flight Assessment, T10, T30

Dominick Whitlow avatar
Written by Dominick Whitlow
Updated this week

Preparing the T30 for Flight

  1. Unfolding the Arms:

    • Lift the arms into position.

    • Lock the clasps until you hear a snap—this ensures they are fully secured.

  2. Setting the Propellers:

    • Remove the prop guards.

    • Position the propellers in a straight, uniform line.

    • Inspect the propellers for any looseness, cracks, or bends before flight.

  3. Installing the Battery:

    • When inserting the battery, ensure the terminals on the battery align with those on the drone.

    • Slide the battery in slowly until you hear a click, confirming it’s secure.

    • To turn on the battery, press once and then press and hold. Repeat the same process to turn it off.

This setup process ensures that the T30 is secure and ready for safe flight operations.

Explore additional battery tips and tricks by visiting the resources linked below.


Preparing the T10 for Flight

  • The T10 closely resembles the T30 in flight preparation. Here's a video guide on preparing the T10 for flight.

Did this answer your question?