Navigate to Your Equipment
Hover over your Account Icon on the Top Right-Hand Corner of the screen and click on "Manage Organization"
Navigate and click on "Equipment"
Add Aircraft
Click on "Add Aircraft"
Enter in your Drone's Information
Category | Meaning | Example |
Drone Name | This is a "Nickname" used to select a drone within AcreConnect™ | Red Drone |
Drone Make | The manufacture of the Drone | DJI, XAG, Etc. |
Drone Model | Model of the drone from the specified manufacturer | Agras T40, Agras T50, P100 Pro, P150, Etc. |
Registration Number | Registration Number from the FAA (For above 55lbs drones, this is the N-Number) | N123AA (Above 55lbs drone Ex) FA3X7Y9T5H (Below 55lb drone Ex) |
Serial Number | The number displayed on the side of the drone, typically found on a metal plate | 63YBLLA102004X |
Flight Controller Serial | Serial Number of the Physical Flight Controller (This is the "Identity" of the drone | 186324P18223443597LK |
Swath Width Meters | The total width of the drone's spray swath | 7.6m |
Important Note: The Flight Controller Serial Number serves as the drone's unique identifier. If this number is incorrect, it will affect the selection of the drone's information.
On newer drones, the Flight Controller Serial Number is the same as the RID (Remote ID) and should match the Serial Number provided to the FAA on registration documents.
For newer DJI drones (T40 and later), the Flight Controller Serial Number begins with 1581F and is followed by 15 additional characters (Ex. 1581F574B244C50102S3).
For XAG drones older than the P150, the Flight Controller Serial Number can be found on the metal SN plate on the side of the drone's frame (EX. 8219347H4Y79).
For the XAG P150, the Flight Controller Serial Number starts with 1863 and is followed by 16 additional characters (Ex. 186324P18233543598LK).
Edit or Delete Your Aircraft
You can edit or delete an aircraft from your organization at any time. Simply click the three dots in the top right corner of the drone's profile you wish to modify or remove.
Note: You can only edit the drone's name and swath width. To modify any other details, you must delete the existing aircraft profile and create a new one.