Skip to main content
Manual Mode

Manual, Flying, T10, T30

Dominick Whitlow avatar
Written by Dominick Whitlow
Updated over a month ago

Switching to Manual Mode

  1. Access Task Modes:

    • In the top left-hand corner of the screen, tap to access task modes.

  2. Select Manual Mode:

    • You will see three options:

      • M: Manual (for complete manual control).

      • M+: Manual Plus.

      • AB: Another mode for autonomous or guided flight.

    • For full manual control, select M.

  3. Manual Takeoff:

    • Press both thumbsticks down and inward to initiate takeoff.

  4. Spray System Control:

    • On the left-hand side of the remote, there’s a button with a red dot to turn the spray system on or off.

    • Below this button, there’s a silver wheel to adjust the flow rate:

      • Turn right to increase the flow.

      • Turn left to decrease the flow.

    • The number of active nozzles will adjust with the flow rate.

  5. Flight and Spray Indicators:

    • Spraying On: A green line appears on the map to show where you've sprayed.

    • Spraying Off: A white line appears, indicating areas flown without spraying.

  6. Manual Landing:

    • Return to home and land manually as there is no automatic return-to-home function in Manual mode.

This mode gives you full control over the drone’s flight, height, speed, and spray system. It's ideal for precision work but requires more manual piloting skills.

Did this answer your question?