Skip to main content
Manual Mode

T40, Manual

Dominick Whitlow avatar
Written by Dominick Whitlow
Updated this week

Manual Mode Instructions

To activate and use Manual Mode:

  1. Select Mode: Tap the square in the left corner of the screen and choose “Manual.”

  2. Adjust Droplet Coarseness: Set droplet size as needed.

  3. Take Off: Push both joysticks down and inward to lift off.

  4. Control Spraying: Press the red button to start/stop spraying.

  5. Mid-Flight Adjustments: Modify droplet coarseness using the arrow and “Apply.”

  6. Flow Rate: Adjust with the knob below the red button.

  7. Flight Control: Manage height, speed, and direction for precision.

This setup ensures full control and precision during flight.

Did this answer your question?