The mapping feature allows precise area mapping using RTK. Follow these steps:
Access Route Mapping: Tap the top left corner and select “Route Mapping.”
(Note: RTK is required.)Set Boundary Points:
Tap “Add” to mark boundaries (limited to 33 acres per flight due to RC memory).
Adjust flight routes by double-tapping a boundary or moving the yellow dots.
Choose image resolution and view mapping area, estimated photos, and flight time.
Pre-Task Auto Check:
Ensure that signal, radar, and task settings are correct.
Set "On Signal Lost" to “Return to Home.” (This is an FAA requirement.)
Execute Mission:
Swipe to start. The drone processes images during flight.
Remain on the screen until image processing completes.
The final map will be RTK-accurate, ready for field planning.
Tip: It is recommended to use an empty tank for the most efficient use of the battery.